Axial SCX6 Jeep 1/6 Aluminum Rear Shock Tower Replacement JR-SCX604-BK by Jazrider  [JR-SCX604-BK]

Axial 1/6 SCX6 Jeep Aluminum Rear Shock Tower Set (Black)
Price:
NZD$35.92
Brand:
JAZRIDER
Model:
JR-SCX604-BK
Condition:
Brand New
Write a review

Rear Shock Mount Upgrade for SCX6

The AXIAL SCX6 Jeep 1/6 Aluminum Rear Shock Tower, model JR-SCX604-BK, replaces the stock plastic top mount with a rigid aluminium plate to reduce mount flex on Axial SCX6-based crawlers. Finished in black anodising, it provides a firmer anchor for rear shocks during technical trail work.

Moving the shock top to a machined plate reduces movement at the mount, which supports steadier shock action under load. That stability makes it easier to dial in oil, springs and shock positions for predictable behaviour on obstacles.

Specifications

  • Item: Axial 1/6 SCX6 Jeep Aluminum Rear Shock Tower Set (Black)
  • Material: Aluminum
  • Model Number: JR-SCX604-BK
  • Compatibility: Axial 1/6 SCX6 Jeep JLU Wrangler 4WD

Install this aluminium top mount when you want reduced flex and more reliable shock geometry for Axial SCX6 Jeep builds.

How straightforward is fitting this to an SCX6?

Fitting is typically a direct swap if your chassis uses the standard SCX6 shock top locations. Check that the mounting holes line up and reuse or replace fasteners as needed.

Can I use my existing shocks?

Yes, common SCX6 shock assemblies should work with this tower; the plate changes only the top mounting interface, not the shock internals.

Does the plate add significant weight?

There is a modest weight increase versus plastic parts, but the trade-off is improved stiffness and more consistent suspension behaviour on demanding trails.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved