AXIAL SMT10 Front Steering C-Hub & Knuckle Arm 5 Degree MJ019021/5D by GPM  [MJ019021/5D]

Aluminium C-hub and knuckle upgrade for AXIAL SMT10

This aluminium front C-hub and knuckle arm set is supplied as a 4pcs replacement to alter front toe to a 5 degree toe-in. It is intended to stiffen steering feedback and improve initial turn-in sensitivity on AXIAL SMT10 based models while remaining a non-OEM hobby upgrade.

Fitment and role: moving to a 5 degree toe-in changes scrub and steering reaction, which can help with tight technical lines or monster-style layouts where quicker steering is useful. These parts replace factory plastic items for routine maintenance and upgraded service life on scale rigs.

Installation notes: remove the front suspension components to swap hubs and knuckles, check wheel hex positioning and pin fit, and confirm steering link clearance after installation. Use appropriate thread locking on fasteners for aggressive running.

Use this 4pcs aluminium set to tune an AXIAL SMT10 chassis toward a more responsive front end, then adjust steering links and toe settings for best handling.