Axial Wraith Chassis Linkage Upgrade — Aluminum AW-23006-BK by Jazrider  [AW-23006-BK]

Axial Racing Wraith Aluminum Chassis Linkage (Black)
Price:
NZD$31.84
Brand:
JAZRIDER
Model:
AW-23006-BK
Condition:
Brand New
Write a review

Heavy-duty aluminum linkage for Wraith

The AW-23006-BK is an aluminum chassis linkage made for Axial Wraith platforms to replace the original plastic link. Its metal construction provides improved wear resistance and a stiffer pivot that helps maintain chassis geometry under load.

Fitting is straightforward for experienced modelers: remove the stock link, check alignment, and attach the aluminum piece using appropriate hardware. Expect the link to change how the chassis flexes; if you are tuning for scale handling, evaluate corner behavior after installation.

Routine checks are recommended: inspect mounting holes and fastener threads, maintain correct torque values to protect the aluminum, and verify that the link clears adjacent suspension and driveshaft components.

Specifications

  • Item: Axial Racing Wraith Aluminum Chassis Linkage (Black)
  • Material: Aluminum
  • Model Number: AW-23006-BK
  • Compatibility: Axial Racing Wraith

Pick this part when you need a tougher, metal alternative to stock links and when stable chassis response is part of your setup goals.

Yes — aluminum resists the wear and deformation that can affect plastic links, particularly under heavy use, but inspect mounting points periodically for fatigue.
The black anodized finish adds surface protection, but avoid exposing parts to harsh chemicals and rinse salt or grit after salty or muddy runs.
A small amount of medium-strength threadlocker can help keep screws secure without making future removals difficult; avoid excessive locking compounds that may seize threads.
Cycle the suspension through its full travel and spin the drivetrain by hand to confirm the link does not contact driveshafts, shocks, or steering links.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved