Axial Wraith Compatible 14T Steel Pinion WR9014TS by GPM  [WR9014TS]

Steel 14-tooth pinion for Wraith setups

Hardened steel 14T motor pinion made for Axial Wraith drivetrains, sold as an aftermarket spare under model WR9014TS. It provides direct tooth engagement with the spur gear where a 14-tooth pinion is required to achieve the chosen final ratio.

Use this pinion to replace damaged teeth or to tune gearing on trail and competition Wraith-style rigs. The steel build delivers improved wear resistance compared with softer materials and handles repeated fitting without rapid degradation.

Installation advice: set the axial position of the pinion on the motor shaft, adjust mesh to avoid binding or excessive play, and secure with your motor's existing retention method. Re-check gear interaction after a brief run.