Axial Yeti 64-Tooth 32 Pitch Steel Spur YT064TS by GPM  [YT064TS]

Axial Racing Yeti Steel #45 Spur Gear 32 Pitch 64T (AX31065) - 1pc - GPM YT064TS
Price:
NZD$26.64
Brand:
GPM
Model:
YT064TS
GTIN:
4894538241778
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Axial Racing Yeti Steel #45 Spur Gear 32 Pitch 64T (AX31065) - 1pc - GPM YT064TS" title="Axial Racing Yeti Steel #45 Spur Gear 32 Pitch 64T (AX31065) - 1pc - GPM YT064TS"

Spur gear for Yeti drivetrains

This is an RC-scale steel spur made to suit Axial Yeti chassis, supplied as 1 pcs and cut to a 32 pitch profile. It serves as a swap-in 64-tooth spur for maintenance or when altering final drive ratios. The component is listed as Steel #45 and is intended to re-establish correct tooth contact and consistent gear mesh with compatible pinions and standard Axial Yeti gearboxes.

Installation advice: set gear mesh using your current pinion, install shims where necessary to avoid binding, and confirm gearbox and motor mount alignment before running. When tuning, note that moving to a 64T spur changes overall gearing and wheel torque, so pair with the right pinion to hit your target speed and acceleration characteristics.

Specifications

  • Item: Axial Racing Yeti Spur Gear 64T 32 pitch
  • Material: Steel #45
  • Model Number: YT064TS
  • Compatibility: Axial Racing Yeti

Choose this spur when replacing a worn 64T or when changing gearing for tuning. Always confirm pitch and tooth count match your drivetrain before fitting.

How do I check tooth count and compatibility quickly?

Count the teeth on your existing spur and confirm the pitch with a manual or caliper; if you have 64 teeth and 32 pitch, this YT064TS is a match.

Can I run this with standard pinions or do I need special ones?

Use standard 32 pitch pinions sized to achieve the gear ratio you want; ensure correct mesh and avoid mixing different pitch parts.

Is special lubrication recommended for Steel #45?

A light coating of gear grease helps limit wear and keeps grit from abrading teeth, but excessive grease can attract dirt, so apply sparingly.

Will this gear affect top speed or torque?

Moving to 64T increases final drive ratio compared to smaller spurs, typically lowering top speed while improving low-end torque; adjust pinion accordingly for your chosen balance.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved