Axial Yeti Offset Adapters 22mm for 2.2 Wheels YT022C by GPM  [YT022C]

2.2 wheel hub adapters suited to Axial Yeti

This pair of aluminium hub adapters is intended to change wheel offset on 2.2" wheel configurations. Supplied as a matched set, the adapters increase lateral spacing between wheel and hub so you can alter track width and wheel stance without modifying hubs or axles.

Described as 22mm thick aluminium in platform terms, the adapters are a simple hop-up for adjusting handling balance and tyre clearance on rock crawling or trail rigs. Effects will vary with tyre size, wheel backspacing and suspension setup, so check wheel-to-shock and link clearance before use.

Installation follows a straightforward hub swap: remove the wheel, take off the stock hub or wheel hex as needed, fit the adapter to the hub or axle according to your chassis layout, then refit wheel hardware and confirm rotation and hex engagement. Use proper hex screws and double-check bearing alignment to avoid binding.