Axial Yeti XL Front Knuckle Arm Upgrade - YTL-25000 by Jazrider  [YTL-25000]

Axial Yeti XL Aluminum Front Knuckle Arms Set
Price:
NZD$27.65
Brand:
JAZRIDER
Model:
YTL-25000
Condition:
Brand New
Available in shop
Write a review

Yeti XL front steering knuckles

The YTL-25000 knuckle arm set is an aftermarket RC replacement made for the Axial Yeti XL steering assembly. Crafted from aluminum, the parts offer a stiffer anchor than factory plastic, aiming to reduce deformation and keep suspension geometry consistent over rough terrain.

These components act as direct replacements when compatible and serve as a tuning item by providing a steadier pivot for the front suspension, which can change steering responsiveness and caster stability. The pair replaces both left and right knuckles; always check fit against your specific Yeti XL steering setup before assembly.

Installation notes: these knuckles secure to the existing front hub carriers and are compatible with stock fasteners and linkage locations on typical Yeti XL machines. Extensive modification is not usually necessary, though verifying clearance with chosen wheels and C-hubs after installation is advised. Regular checks of pins and bearings will help maintain reliable performance.

Specifications

  • Item: Axial Yeti XL Aluminum Front Knuckle Arms Set
  • Material: Aluminum
  • Model Number: YTL-25000
  • Compatibility: Axial Yeti XL

Compatible Models

  • Axial Yeti XL

Fit these knuckles to cut down front flex and create a firmer steering platform; adhere to recommended bearing care and hardware torque to avoid excess wear.

How often should I inspect the knuckles?

Inspect them after heavy sessions and as part of routine maintenance; look for play at pivot points and ensure bearings turn freely to prevent progressive wear.

Can I reuse the stock bearings?

Stock bearings can be reused if in good condition, but fitting fresh, high-quality bearings will provide the best longevity and smoother steering operation.

Will aluminum change wear patterns?

Aluminum reduces flex compared with plastic, which can move wear to mating pins and bearings if they are not maintained; monitor those components closely after upgrading.

Any recommended lubrication?

Use a light bearing oil or grease as appropriate for your environment and service schedule; avoid heavy greases that can attract grit and shorten bearing life.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved