Axial-compatible Wheel Hex Adapters 15mm Brass RR010X/1215 - RR10 Bomber Fitment by GPM  [RR010X/1215]

AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215
Price:
NZD$28.97
Brand:
GPM
Model:
RR010X/1215
GTIN:
4894538330533
Condition:
Brand New
Write a review
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"
alt="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215" title="AXIAL Racing RR10 Bomber Brass Wheel Hex Adapters 15mm - 28pc set - GPM RR010X/1215"

Brass 15mm wheel hex adapters for wider track

The RR010X/1215 28-piece set is made to work with Axial hub interfaces, replacing or extending stock hexes to change wheel offset and broaden the vehicle track for better cornering stability.

Bodies are machined from brass to introduce additional wheel-end mass, listed at approximately 11g per adapter, and the 15mm width closes up the wheel-to-hub gap compared with thinner hexes for a firmer fit on uneven ground.

Fitment is straightforward using the supplied hardware; the kit groups Delrin rings, pins, washers, screws and shims so you can swap them in on compatible models without sourcing extra parts.

Packing includes

  • Hex Adapter - 4pcs
  • Delrin Ring 5x7x2.5 - 4pcs
  • Steel Pin 2x10 - 4pcs
  • 5mm Metal Washer - 4pcs
  • Stainless Steel Screw Shaft M3x11.5 - 4pcs
  • Stainless Steel Hex Socket Screw 10mm - 4pcs
  • Shim 5x10x1 - 4pcs

Original Name / Part No:

AX30249 (RR10),AX30429 (WRAITH, SMT10 MONSTER JAM)

Compatible Models

  • Axial WRAITH 4WD ROCK RACER
  • RR10 BOMBER
  • SMT10 GRAVE DIGGER AX90055
  • SMT10 MAX-D AX90057

If you want a quick way to widen stance and add wheel-end weight, these 15mm brass hex adapters install with the included hardware and help control wheel movement on rough trails.

How do these affect handling?

Widening the track with 15mm adapters increases lateral stability and the added brass mass helps keep wheels planted over bumps, improving predictability on rough terrain.

Are the adapters compatible with WRAITH and SMT10?

Yes, compatibility is listed in the compatibility box and includes WRAITH, RR10 BOMBER and the SMT10 variants shown.

Do they require hub modifications?

No hub geometry changes are required for the listed models; the adapters are designed for a direct replacement or extension using the supplied hardware.

What maintenance is needed?

Inspect pins and screws after heavy runs and replace washers or shims if you notice play; the brass bodies resist corrosion but keep threads clean for reliable reassembly.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved