Bandai 5072025 - 30MS Option Parts Set 25 Turbo Costume Gamma (Color C) for 30 Minutes Label  [B-5072025]

Bandai 5072025 - 30MS Option Parts Set 25 (Turbo Costume Gamma)(Color C) OP-25
Price:
NZD$25.13
Brand:
Bandai
Model:
B-5072025
GTIN:
4573102720252
Condition:
Brand New
Available in shop
Write a review
alt="Bandai 5072025 - 30MS Option Parts Set 25 (Turbo Costume Gamma)(Color C) OP-25" title="Bandai 5072025 - 30MS Option Parts Set 25 (Turbo Costume Gamma)(Color C) OP-25"

30MS Turbo Costume Gamma (Color C) accessory overview from Bandai

This option set is made for the Bandai 30 Minutes Label range and delivers alternative costume elements plus joint adapters compatible with 30MS figures.

Context and intended use

OP-25 supplies alternate outer panels designed to interface with the 30MS joint system. The Color C variant gives builders a new costume option that swaps onto compatible 30MS bodies to adjust visual presentation without altering the internal frame.

Assembly and fitment

Pieces arrive in matching molded colors for straightforward snap-fit assembly into existing 30MS frames. The connector pegs and alignment features align to the series geometry, so most parts fit without major modification. Where necessary, light trimming or sanding will fine-tune the fit.

Articulation and modularity

Because the set provides external costume components and adapter parts rather than an internal frame, the base 30MS articulation is retained. In cases where the new panels add bulk, very extreme poses may be restricted and could require minor adjustments to restore clearance.

Surface finish and painting

Color C is supplied in molded tones to cut down on immediate painting; surfaces show typical Bandai kit texture and ejector marks. For a smoother display finish, sand seams, prime, and then apply your chosen topcoat. Molded colors let you focus painting on small details if preferred.

Display and collector considerations

When combined with a compatible 30MS body, the set produces an alternate costume suitable for display. Pose stability depends on the base figure and stance; lower centers of gravity and wider stances help. A display base or support arm is useful for action poses that stress joints.

Specifications

  • Base finish: Parts supplied in Color C molded tones
  • Compatibility: Designed for 30MS series joint interfaces
  • Assembly: Snap-fit installation with optional seam work and painting

An effective option pack for modifying 30MS figures that preserves core articulation while offering a distinctive Color C costume. Preparation is moderate and final builds present well for display.

Expect to remove light injection texture and tidy seams for the best finish. Use fine sandpaper, primer, and a light topcoat for a cleaner display result.
Molded tones reduce the need for full repainting and work well for casual display. For show-level presentation, selective panel painting and panel lining are recommended.
The set includes joint-compatible adapter pieces intended for standard 30MS interfaces, so most fitment scenarios do not require extra aftermarket hardware.
Fill shallow marks with putty, sand smooth, then prime to check surfaces before painting. Multiple light passes of primer show remaining imperfections more clearly than a single heavy coat.
The lightweight molded panels have minimal effect on balance, but extreme accessories or back-mounted parts can change center of gravity. Adjust stance or use a base for more demanding displays.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved