BD10 Upper Deck Aluminium Support Post - B10-118CPA by Yokomo  [B10-118CPA]

Yokomo B10-118CPA Aluminum cross plate post for BD10
Price:
NZD$36.86
Brand:
Yokomo
Model:
B10-118CPA
GTIN:
0639342202454
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10LCRA category
Write a review

Aluminium support post for BD10 upper deck

This aluminium cross plate post is a replacement part built to support the front section of the BD10 upper deck. It gives an alternative attachment point for the upper deck and permits tuning of chassis roll by changing screw positions and the count of fasteners used.

Use the post if you are seeking a firmer or more graduated roll response from the front by trialling different mounting configurations. It is aimed at hobby-grade 1/10 touring car chassis setups and serves as a tuning option when balancing handling on the circuit.

Fitting is straightforward with common workshop tools and access to the BD10 upper deck mounting area. After assembly, check that threads are fully engaged and fasteners are torqued correctly, then perform test runs to judge the effect of each change.

Specifications

  • Item: Aluminum cross plate post for BD10 upper deck support
  • Material: Aluminum
  • Model Number: B10-118CPA
  • Compatibility: MRTC-BD10 / MRTC-BD10A / MRTC-BD10LC / MRTC-BD10LCA / MRTC-BD10LCR / MRTC-BD10LCRA / MRTC-BD11- 1 / MSR-BD11 / MRTC-BD11A-1

Compatibility

  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA
  • MRTC-BD11- 1
  • MSR-BD11
  • MRTC-BD11A-1

For BD10 owners wanting a simple way to vary upper deck support and investigate roll behaviour, this aluminium post is a compact tuning aid to keep in your spares box.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How durable is the aluminium post under normal use?

The post is machined from aluminium alloy and is suitable for routine track use; as with any metal part, inspect for deformation after heavy impacts and replace if damaged.

Does it hold up to minor crashes and impacts?

It withstands typical minor impacts, but significant impacts can bend or stress the post. Regular inspection and having a spare is recommended for those who push hard.

Any maintenance needed after fitting?

Check fastener torque and thread condition periodically. Clean mating surfaces and re-torque after initial test runs to ensure consistent performance.

Will repeated setup changes wear the mounting points?

Frequent changes can cause wear in soft materials; using correct fastener torque and inspecting threads will minimise wear, and aluminium posts generally hold up well if not over-tightened.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved