BD7/BD5 Sway Bar Upgrade for Precise Roll - Yokomo BD-412W [BD-412W]

Yokomo BD-412W Sway bar only (7sizes) for BD7/BD5

Price:

NZD$9.60

Brand:

Yokomo

Model:

BD-412W

GTIN:

3888

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category

Write a review

Description
FAQ

Yokomo BD-412W: Seven Sizes for Accurate Roll Control

Use the BD-412W kit to adjust roll stiffness on Yokomo BD7 or BD5 chassis. The set spans 1.0mm to 1.6mm in 0.1mm increments, enabling subtle handling tweaks for different track layouts.

Range That Lets You Tune Precisely

Each stabilizer is marked at the centre for fast selection during practice. The clear progression simplifies comparative testing so you can identify the best setup quickly.

Compatible Chassis Models

Suitable Models

MRTC-BD715B
MRTC-BD715O
MRTC-BD715S
MRTC-BD8
MRTC-BD8A
MRTC-BD8-P
MRTC-BD8AP
MRTC-BD8SV
MRTC-BD818A
MRTC-BD818
MRTC-BD7RS
MRTC-BD7RS2
MRTC-BD7RS3S

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install the sway bar on my BD7/BD5?

Installation follows your chassis' stabilizer mount points; remove the existing wire, fit the chosen gauge, and check endlink alignment. Make small changes and test drive between adjustments to gauge effect.

Is it okay to swap front and rear bars?

You can experiment with different thicknesses front to rear to alter balance, but note handling shifts can be significant. Record each change so you can return to a known setup if needed.