BD8 2018 Aluminum Steering Bell Crank - B8-202SS by Yokomo  [B8-202SS]

Yokomo B8-202SS Steering Bell Crank set for BD8 2018
Price:
NZD$37.71
Brand:
Yokomo
Model:
B8-202SS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Aluminum bell crank designed for BD8 2018

This replacement steering bell crank is crafted in aluminum for the BD8 2018 platform and fitted with press-mounted bearings to minimize slack in the steering linkage. The design helps maintain consistent link travel during aggressive laps.

Compatibility covers BD8 2018 chassis and the MRTC-BD818 / MRTC-BD818A variants stated. Proper fitting involves lining up the bell crank to the steering link geometry and ensuring the pressed bearings turn smoothly prior to final assembly.

Tuning impact: installing this component gives a more stable pivot point that resists deflection under steering loads, helping to keep toe and turn-in characteristics steady when adjusting your setup.

Specifications

  • Item Steering bell crank set for BD8 2018
  • Material Aluminum
  • Model Number B8-202SS
  • Compatibility BD8 2018, MRTC-BD818, MRTC-BD818A

Choose this bell crank when replacing tired plastic pivots or when you need a firmer aluminium pivot to stabilise steering on paved tracks.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I fit this on earlier BD8 models?

This unit is specified for BD8 2018 and compatible MRTC-BD818 / MRTC-BD818A; fitment on earlier BD8 variants is not guaranteed and should be trial fitted carefully.

How durable are the press-fitted bearings under frequent use?

Press-fitted bearings are robust for typical on-road duty but inspect them periodically for wear; replace if spin becomes rough or play appears.

Is any special tool required to press the bearings?

A simple arbor press or carefully applied hand press is recommended to seat the bearings evenly; avoid uneven force that could distort the bore.

What maintenance keeps this part performing best?

Keep the bearing area clean and apply minimal high-quality lubricant if needed; regular checks for free rotation will extend service life.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved