BD-ABM6 Adjustable Body Mount Sleeve for BD7/BD5 Chassis by Yokomo  [BD-ABM6]

The BD-ABM6 from Yokomo is a compact adapter that caps a 6mm body post to enable small, precise body-height changes on 1/10 scale on-road and drift cars. It avoids the need to cut the body or replace long posts when only slight adjustments are required.

Using the included adjustable nut and O-ring, the sleeve can be locked at the chosen position to raise or lower the body by tiny increments. That control helps prevent rubbing between body and tyres or chassis and assists in fine balancing of front-to-rear body rake for handling improvements.

Installation is straightforward: slide the sleeve onto the post, choose the setting, then secure with the nut and O-ring. Inspect clearances after fitting and re-tighten if necessary. This is supplied as an accessory for RC model use.

Packing includes

• Mount Sleeve - 2 pcs
• Adjustable Nut - 2 pcs
• O Ring - 2 pcs

Compatible Models

• MRTC-BD7RS
• MRTC-BD7RS2