Cero Steering Knuckle Upgrade for Cero SAK-C141/V2 — Ver.2 Front Suspension Part by 3Racing  [SAK-C141/V2]

Price:
NZD$25.71
Brand:
3Racing
Model:
SAK-C141/V2
Condition:
Brand New
Write a review

Overview of the Ver.2 Cero Knuckle

The SAK-C141/V2 Cero Knuckle Ver.2 serves as a direct replacement knuckle for Cero-style front assemblies. It is focused on controlling steering pivot characteristics to improve front suspension behavior without changing motor or drivetrain mounting.

By defining hub location, steering axis, and scrub radius, the Ver.2 alters how the front end reacts during weight transfer and braking. It is intended for 1/10 scale electric touring and pan car platforms that accept the Cero knuckle form.

Fitting the knuckle involves removing the wheel hub and steering links, swapping in the Ver.2 knuckle, then reinstalling the hub, bearings, and tie rods. Check steering link lengths and toe after installation, and ensure bearings are seated and free to rotate before final torque.

Tuning with this knuckle typically uses shock mounting and anti-squat adjustments to influence camber gain and roll center, rather than changing the knuckle itself.

What handling differences can I expect after fitting Ver.2?

Expect a steadier steering feel with fewer sudden steering reactions; the pivot adjustment smooths turn-in and improves mid-corner stability.

Is any specialized press work required?

No specialized presses are normally needed. Standard RC tools such as hex drivers, pliers, and bearing presses for seating bearings are sufficient.

Should I change swaybar or shock positions after installing?

Yes. Since the knuckle modifies roll behavior, re-evaluate shock mounts and swaybar tuning to restore desired roll center and transient response.

Will this work with convertible or nonstandard hubs?

It is made for Cero-format hubs. Using other hub standards may require adapters or modifications and is not guaranteed to be plug-and-play.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved