Concept 60 Tail Center Hub - Kyosho H6053R  [KYH6053R]

Component summary and fit

The Kyosho H6053R tail center hub is an aftermarket replacement designed for Concept 60 models, providing the central connection in the tail assembly. It helps reestablish the mechanical link between the tail rotor drive and the tail boom during servicing or repair.

Fitting the hub normally involves removing the tail rotor and associated linkages, checking alignment and axial play, then refitting with the recommended fasteners and thread locking compounds where applicable. Always inspect bearings and mating parts when replacing the hub, since worn components will affect tail performance.

In setup and tuning the hub acts as a structural mount that maintains correct tail rotor geometry and consistent pitch response. When investigating tail instability or inconsistent yaw, look for play at the hub and ensure control linkages and tail drive elements are centered and secured before altering trim or pitch settings.