Cross Member M3 x 82 HI2511026 Compatible with Hirobo Helicopter General Parts  [HI2511026]

This HIROBO item, model HI2511026 with M3 x 82 sizing, is an RC structural connector intended as a spare for helicopter general parts. It provides a straight, rigid link between mounting points to support frame integrity.

Design purpose: intended to preserve the designed geometry of the airframe by securing positions and spacing of adjacent components, rather than modifying flying characteristics. Use it wherever a fixed load-bearing connector is required in an RC helicopter chassis.

Installation notes: as the label indicates M3 x 82, install using M3 fasteners of the correct length for your pattern, ensure mating surfaces are flush, and confirm alignment before torquing. Do not over-tighten to avoid thread distortion, and check joints periodically for signs of movement.

Tuning and maintenance: the cross member affects overall stiffness; slight variations in connector length or placement alter frame rigidity. Replace the part if it shows deformation or repeated looseness, and re-torque hardware after initial test flights following maintenance.