The WH-15/R/BL set is supplied as four matched rear tyre-and-rim assemblies for fitment to the TAMIYA DF03. Items are ready to bolt on and designed to simplify replacement of worn rear wheels.
Intended use: these units act as replacement spares and small-scale tuning items that change rear track characteristics, rotating mass and tyre seating options. They are suitable for restoring original geometry after wear or for swapping between practice and display setups.
Fitting notes: remove the rear wheel assemblies from the hub per your DF03 procedure, mount the 4 pcs one at a time, confirm tyres are seated evenly and that the wheels spin freely, then check for any side-to-side play. A static balance check or a short low-speed run is recommended before extended use.
Handling considerations: changing wheel sets alters unsprung mass and therefore rear response. After fitting WH-15/R/BL wheels, re-verify rear ride height and toe settings on the DF03 to maintain consistent handling.
Copyright © 2008-2026 rcjaz.co.nz All rights reserved