DP-RS13SP Compatible Rear H-arm Weight - Y2-008RW20 Yokomo  [Y2-008RW20]

Yokomo Y2-008RW20 jp
Price:
NZD$75.11
Brand:
Yokomo
Model:
Y2-008RW20
GTIN:
639342223428
Condition:
Brand New
Write a review
alt="Yokomo Y2-008RW20 jp" title="Yokomo Y2-008RW20 jp"
alt="Yokomo Y2-008RW20 jp" title="Yokomo Y2-008RW20 jp"

H-arm rear mass insert

The Yokomo Y2-008RW20 replacement base weight fits onto the H-arm mounting points to raise unsprung mass at the rear axle, increasing tyre grip without changing how the chassis balances overall. It arrives with 20g on each side as the standard setup, and additional 5g or 10g plates can be added separately to refine how the rear end hooks up.

Since the extra weight is applied to the unsprung components rather than the chassis shell, its influence persists regardless of pitching or chassis movement, helping to smooth corner entry and reduce sudden slides. Choose this part when adjusting rear traction while keeping chassis equilibrium intact.

Specifications

  • Item: Base weight for H-arm, 20g per side base mass.
  • Material: Not specified.
  • Model Number: Y2-008RW20.
  • Compatibility: See Compatible Models list below.

Compatible Models

  • DP-GR86
  • DP-GR86G
  • DP-GR86RTRG
  • DP-GR86RTRW
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2
  • DP-YD2-PLS
  • DP-YD2AC
  • DP-YD2ACA
  • DP-YD2E
  • DP-YD2EG
  • DP-YD2EPLS
  • DP-YD2ES
  • DP-YD2EX
  • DP-YD2EX2
  • DP-YD2EXB
  • DP-YD2EXR
  • DP-YD2G
  • DP-YD2RAB
  • DP-YD2RAP
  • DP-YD2RAR
  • DP-YD2RPLS
  • DP-YD2RSAB
  • DP-YD2RSAP
  • DP-YD2RSAR
  • DP-YD2RTRR-1
  • DP-YD2RTRR-2
  • DP-YD2RTRW-1
  • DP-YD2RTRW-2
  • DP-YD2RX
  • DP-YD2RXP
  • DP-YD2RXR
  • DP-YD2RXTB
  • DP-YD2RXTP
  • DP-YD2RXTR
  • DP-YD2S
  • DP-YD2S-PL
  • DP-YD2SAB
  • DP-YD2SAP
  • DP-YD2SAR
  • DP-YD2SG
  • DP-YD2SS
  • DP-YD2SSAB
  • DP-YD2SSAP
  • DP-YD2SSAR
  • DP-YD2SX
  • DP-YD2SX2
  • DP-YD2SX2P
  • DP-YD2SX2R
  • DP-YD2SX3
  • DP-YD2SX3P
  • DP-YD2SX3R
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZS
  • DP-YD2ZSG
  • DP-YD2ZX
  • DP-YD2ZXP
  • DP-YD2ZXR
  • DP-YD4
  • DP-YD4MR
  • MDR-010
  • MDR-010A
  • MDR-010P
  • MDR-010R
  • MDR-020
  • MDR-020BL
  • MDR-020P
  • MDR-020R
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • SDR-010
  • SDR-010LTS
  • SDR-020
  • SDR-020P
  • SDR-020R
  • DPR-GRA90W
  • DPR-GRA90R
  • SDR-030
  • SDR-030BL
  • SDR-030P
  • SDR-030R
  • DPR-GR86G
  • DPR-GR86W
  • MDR-030
  • MDR-030BL
  • MDR-030P
  • MDR-030R
  • DPR-DP
  • DPR-RZ34BL
  • DPR-RZ34R
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • SDR-030CBZ
  • SDR-030CPI
  • SDR-030CBL
  • SDR-030CP
  • SDR-030CR
  • DP-MS15BL
  • DPR-MS15
  • DP-RS13SP
  • DP-FCBN

The Y2-008RW20 base weight is an effective way to increase rear-end grip by adding unsprung mass at the H-arm; tune incrementally with compatible 5g or 10g plates to match track surface and handling goals.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How robust is the base weight under racing use?

The base unit is intended for competition tuning and will withstand normal track loads; inspect mounting hardware after hard impacts to ensure the weight remains secure.

Does the part change wear on tyres?

Adding unsprung mass can increase tyre bite and alter wear patterns slightly; monitor compound wear after fitting and adjust setup if necessary.

Are the add-on plates a snug fit?

Yes, the 5g and 10g plates are machined to stack cleanly on the base unit for a positive fit; they are sold separately so you can select the increments you need.

Which DP-YD2 trims are explicitly supported?

Check the Compatible Models list above for the exact DP-YD2 variants included; the list covers a wide range of sub-models and RTR packages.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved