DX1R RPM-DX105RR 10.5T Brushless Drift Motor for 1/10 Cars by Yokomo  [RPM-DX105RR]

Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)
Price:
NZD$211.33
Brand:
Yokomo
Model:
RPM-DX105RR
GTIN:
639342209491
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)" title="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)"
alt="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)" title="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)"
alt="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)" title="Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series Blushless motor (10.5T)"

Overview of the DX1R 10.5T unit

The Yokomo RPM-DX105RR is offered in a 10.5T DX1R winding that prioritizes top-end revs and a smooth torque curve suited to drifting on surfaces like carpet and asphalt. Its tuning favors consistent rotation at higher RPM ranges for controlled slides.

The motor receives an anodized finish on the case and rear plate, available in red and purple finishes to match common YD-2 influenced bodywork. The styling update keeps the familiar Type-R case form while adding a coordinated color option for builders.

Internally, the RPM-DX105RR uses a revised stator and coil layout to promote smoother rotation and refined deceleration behavior. The setup aims to give neutral braking that is predictable during drift transitions, reducing sudden lateral bite.

Specifications

  • Item: Yokomo RPM-DX105RR DRIFT PERFORMANCE DX1R series brushless motor (10.5T)
  • Model Number: RPM-DX105RR
  • Turns: 10.5T
  • Rotor: D12.0xd7.25
  • Material: Anodized finish on case and back plate
  • Compatibility: Supported chassis SDR-010 / SDR-010LTS

Built for RC drift use, the RPM-DX105RR blends Type-R high-rev character with an anodized aesthetic for pilots focused on both drive feel and appearance.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How should I check mount compatibility before fitting?

Measure your motor mount bolt pattern and clearance, and compare it against the SDR-010 / SDR-010LTS compatibility notes. Verify shaft position so pinion alignment is correct.

Are there wiring or ESC settings to prefer?

For a 10.5T high-rev motor, use an ESC program that supports smooth punch and adjustable braking. Start with moderate low-end punch and light regenerative braking, then tune for the drift feel you want.

Which color choices exist and do they change balance?

Two anodized options are available, red and purple. The color is cosmetic only and does not affect internal balance or electrical performance.

What maintenance keeps the RPM-DX105RR performing?

Regular checks of bearings, secure motor screws, and clean connector contacts will preserve smooth rotation. Inspect the mount and pinion alignment after hard sessions.

What published dimensions should I note?

Key published values include the 10.5T turn count and the rotor size D12.0xd7.25, as specified for the Yokomo RPM-DX105RR.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved