Tamiya F350 HILUX Upgrade Kit 3RACING BS-HL/V1 Ball Bearings  [BS-HL/V1]

Tamiya F350 HILUX Ball Bearing Set - 3RACING BS-HL/V1
Price:
NZD$51.48
Brand:
3Racing
Model:
BS-HL/V1
Condition:
Brand New
Write a review

Precision bearings for improved Tamiya F350 HILUX performance

The 3RACING BS-HL/V1 ball bearing set replaces stock bushings in the Tamiya F350 HILUX to reduce friction and improve drivetrain efficiency. The upgrade is suited to hobbyists wanting crisper drivetrain feedback and less mechanical resistance on rough terrain.

Benefits for off-road use

Switching to ball bearings reduces heat and wear in rotating parts, helping wheels and shafts turn more freely. That means steadier acceleration and less power loss when tackling loose surfaces or technical tracks.

Installation notes

Ensure bearing seats are clean and free from old grease before pressing bearings in. Test each bearing by hand after fitting to confirm smooth rotation, and keep a light film of lubricant for protection.

Can I use these bearings in other Tamiya trucks?

This set is tailored to the F350 HILUX. Some Tamiya models share sizes, but always verify diameter and width before fitting.

What tools do I need to fit them?

A bearing driver or a punch of matching diameter and a small press or vice helps seat bearings without damage. Clean and dry cloths are useful too.

Which lubricant should I use for trail runs?

Use a light oil for speed and a thin grease for longevity in dusty conditions. Reapply after wet or dirty outings.

Are the stock bushings reusable?

You can keep the bushings as spares, but using bearings in place of bushings is the recommended upgrade for smoother operation.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved