For PRO BOAT U-34 Miss Illinois Battery Mount PUH0126 by GPM  [PUH0126]

PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126
Price:
NZD$70.46
Brand:
GPM
Model:
PUH0126
GTIN:
4894538417265
Condition:
Brand New
Write a review
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"
alt="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126" title="PROBOAT Miss Illinois U-34 Carbon Fiber+7075 Alloy Battery Tray set - GPM PUH0126"

Replacement battery mount for Miss Illinois U-34

This aftermarket tray set is made as a replacement and upgrade for the PRO BOAT Miss Illinois U-34 hydro hull, serving as the mounting base for the main propulsion battery. The design pairs a 2.5mm carbon fiber plate with aerospace-grade 7075-T6 alloy fittings to minimise mass while maintaining strength for larger battery packs.

The extended tray accommodates packs up to 8000mAh with a maximum envelope of 180mm (L) x 50mm (W) x 42mm (H). Fasten the battery using the supplied stainless screws and Velcro straps to keep serviceability simple. The tray's repeatable placement aids consistent trim and handling adjustments when relocating weight.

Fitting the tray requires basic interior access to the hull to remove the existing tray, attach the supplied hardware, and verify alignment so nothing contacts the motor, gearbox, or hull structure. The kit supports standard Velcro mounting and countersunk screw fixation as supplied.

Contents of the pack

  • Battery Tray Set - 1pcs
  • Stainless Steel Flat Head Screws 3x6 - 8pcs
  • Stainless Steel Cap Head Screws 3x10 - 8pcs
  • Velcro Straps 2x48cm - 2pcs

Original Name / Part No:

PRB286104?PRB-4067

Compatible Models

  • PRO BOAT U-34 34" Unlimited Hydro Race Boat RTR-PRB-2072T1

Opt for this tray when you need added battery capacity and a stiffer mounting point on PRO BOAT U-34 hulls to extend run time without compromising predictable handling.

Yes, the tray is sized to fit within the internal mounting space of the Miss Illinois U-34; during installation match the tray to the hull mounts and secure with the provided stainless screws.
Batteries up to 8000mAh are supported, with maximum dimensions of 180mm long, 50mm wide, and 42mm high as specified in the details.
The tray uses a laminated 2.5mm carbon fibre plate together with 7075-T6 aluminum alloy components to provide a rigid, lightweight mounting solution.
Yes. The package lists the tray, stainless flat and cap head screws, and two Velcro straps in the packing section.
Fitting requires basic hand tools such as hex drivers and a screwdriver to secure the supplied fasteners and adjust the tray position within the hull.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved