For TRAXXAS E-REVO Rear Bulkhead Aluminium Upgrade ER013A by GPM  [ER013A]

TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A
Price:
NZD$11.56
Brand:
GPM
Model:
ER013A
GTIN:
4894538259612
Condition:
Brand New
Available in shop
Write a review
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"
alt="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A" title="TRAXXAS E-REVO Aluminium Rear Bulkhead - 1pc set - GPM ER013A"

Precision aluminium rear bulkhead for E-REVO

This machined aluminium rear bulkhead is a one-piece replacement intended for the TRAXXAS E-REVO chassis and supplied as ER013A in a single unit. It links the gearbox and suspension pickup points with a metal mounting surface to reduce flex compared with the stock plastic piece.

Installation is aimed at experienced modellers: remove the factory bulkhead, move any seals or bushings into the new alloy part, line up the gearbox and suspension mounts, then secure with the original fasteners. Use the chassis guide for correct torque settings to avoid damage to bearings or surrounding plastic parts.

Fitting an aluminium bulkhead provides a firmer reference for suspension geometry and driveline alignment, helping to stabilise setup changes like shock positions and link lengths. The result is improved repeatability for hobbyists who tune their E-REVO for rough terrain and frequent running.

This item is compatible with

  • TRAXXAS E-REVO

Is ER013A a direct replacement?

ER013A is made for the standard E-REVO layout, but always verify mounting points and clearances on your particular build before final assembly.

Will the alloy bulkhead need maintenance?

Inspect mounting screws and mating surfaces after the first few runs; retorque as required and check for any wear on seals or inserts transferred from the original unit.

Can this change drivetrain alignment?

Yes, the stiffer mount reduces flex so driveline alignment stays closer to your setup settings, which helps reduce drivetrain stress during hard driving.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved