For TRX4 Trail Crawler 23mm Aluminium Hex Adapters - TRX4010/23MM by GPM  [TRX4010/23MM]

Wheel spacer hex for TRX4

This 23mm aluminium hex adapter set is intended for TRAXXAS TRX4 Trail Crawler style RC models, supplied by GPM (TRX4010/23MM). The adapters relocate the wheel mounting point outwards to widen the axle track and close the gap to the chassis so the wheel sits nearer the bodyline.

The adapters fit between the wheel hex and hub or driveshaft end, keeping the front CVD and rear driveshaft engagement while increasing lateral track width. The extra 23mm thickness alters wheel offset and helps the chassis remain more stable when negotiating rocks and uneven terrain at slow crawl speeds.

Installation is simple: remove the wheel hex, slide the adapter onto the hub or CVD stub, then reattach the wheel and secure fasteners. Made from aluminium to retain stiffness without excessive weight, the adapters are available in several colours to match your rig or speed up identification during event setup. This product is for RC-scale applications only.

Included hardware from the product source: Stainless steel screw shaft M4*2.5*11.8 - 4 pcs, 5mm shims - 4 pcs, 5mm metal washers - 4 pcs, stainless steel hex socket screw 19mm - 4 pcs.