Compatible TRAXXAS 56T Carbon Steel Spur Gear SSLA2W056T by GPM  [SSLA2W056T]

TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T
Price:
NZD$32.32
Brand:
GPM
Model:
SSLA2W056T
GTIN:
4894538365818
Condition:
Brand New
Write a review
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"
alt="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T" title="TRAXXAS FORD F-150 SVT RAPTOR OBA Carbon Steel Spur Gear(56T) - 4pc set - GPM SSLA2W056T"

56-tooth hardened spur for TRAXXAS 1/10 2WD

This 1/10 scale spur gear features 56 teeth at 0.8 module and is built for drivetrain use in compatible TRAXXAS 2WD vehicles. Machined from hardened black carbon steel, it serves as a stronger replacement for the standard nylon spur when you need consistent mesh and better wear life. It mounts in the rear gearbox and transmits drive from the pinion to the rest of the drivetrain.

The package includes the main 56T spur gear plus three stainless steel washers for axial spacing; the gear utilises a durable 0.8 module tooth form and is designed to fit the listed TRAXXAS 1/10 2WD models. After installation confirm gear mesh, remove any machining burrs, and ensure bearings and lubricant are in good condition.

Packing includes

  • Spur Gear 56T - 1pcs
  • Stainless Steel Washer 3*7*0.2 - 3pcs

Original Name / Part No:

4690,4683,4686

Compatible Models

  • TRAXXAS-1/10 ELECTRIC 2WD F-150 SVT RAPTOR-58064-2
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-1
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-61
  • TRAXXAS-1/10 2WD BANDIT XL-5 BUGGY-24054-4
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-74
  • TRAXXAS-1/10 2WD BANDIT VXL BRUSHLESS BUGGY-24076-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58014-4
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58024
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-1
  • TRAXXAS-1/10 2WD SLASH SHORT COURSE TRUCK-58034-61
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-74
  • TRAXXAS-1/10 2WD SLASH VXL SHORT COURSE TRUCK-58076-4

Choose this carbon steel 56T spur for a direct steel upgrade on compatible TRAXXAS 1/10 2WD kits and always confirm pinion mesh and clearance before hard running.

Is this compatible with TRAXXAS short course trucks?

Yes, the compatibility list includes several Slash and short course truck models. Refer to the compatible models box to match your exact model code.

Should I change the pinion when fitting this spur?

Not always, but verify pinion tooth condition and pitch match. Replace or dress the pinion if you see wear or poor engagement to protect both pinion and steel spur.

What checks are recommended after fitting?

Set correct mesh with the included washers, spin the gearbox by hand to confirm smooth operation, and run a short, low-load test to verify temperatures and noise levels.

Will this increase drivetrain noise?

Steel-on-steel can be louder than nylon setups. Proper mesh, lubrication and a good pinion match will minimise noise and yield reliable operation.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved