Ford GT4-tec 2.0 Handling Upgrade Combo GT1000 by GPM  [GT1000]

Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set
Price:
NZD$477.02
Brand:
GPM
Model:
GT1000
GTIN:
4894538336290
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"
alt="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set" title="Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pc set"

Overview of the GT4-tec 2.0 combo

The GT1000 combo is an RC-scale suspension and steering hardware pack intended for the Ford GT4-tec 2.0 platform, combining revised dampers, reinforced arms and a full fastener set so tuners can change geometry without altering the chassis.

Technical highlights from the kit are listed below:

  • Aluminum 6061 T6 used on load bearing parts to reduce compliance while keeping weight sensible.
  • POM and Delrin collars are supplied to control shaft clearance and cut friction at rotating joints.
  • Dampers specified as front 53mm and rear 50mm with thicker 3.5mm shafts and reduced travel to lower ride height and improve handling balance.
  • Multiple mounting holes for shocks and adjustable tie rods let you tune camber, toe and roll response.

The set suits hobbyists and club racers who want a single kit to alter handling bias, lower the centre of gravity, or replace aged steering and suspension parts on a Ford GT4-tec 2.0 model.

Packed parts list

  • Front Shock Towers - 1pcs
  • Rear Shock Towers - 1pcs
  • Dampers - 4pcs
  • C-Hubs - 2pcs
  • Front Knuckle Arm - 2pcs
  • Rear Knuckle Arm - 2pcs
  • Front Lower Arm - 2pcs
  • Rear Lower Arm - 2pcs
  • Front Tie Rods + Stabilizer - 3pcs
  • Rear Tie Rods + Stabilizer - 3pcs
  • Tie Rods - 9pcs
  • Steering - 3pcs
  • Stainless Steel Round Head Screw 3x16 - 8pcs
  • Stainless Steel Round Head Screw 3x18 - 4pcs
  • White Delrin Collar - 4pcs
  • Stainless Steel Flat Head Screw 3x10 - 14pcs
  • Stainless Steel Round Head Screw 3x8 - 2pcs
  • Stainless Steel Round Head Screw 3x14 - 12pcs
  • Stainless Steel Round Head Screw 3x12 - 10pcs
  • Stainless Steel Flat Head Screws 3x18 - 4pcs
  • Stainless Steel Flat Head Screws 3x14 - 1pcs
  • Stainless Steel Round Head Screws 3x6 - 2pcs
  • Alloy Collar 3x6x2 - 4pcs
  • POM Collar - 4pcs
  • Aluminum Collar 3x6x3 - 2pcs
  • White Delrin Collar 6x10x3 - 2pcs
  • White Delrin Collar 5x8x2.5 - 2pcs
  • Copper Collar - 2pcs
  • CVD - 4pcs
  • Brake Disk - 2pcs

Original Name / Part No:

8338+8360+8337+8332+8352+8333+8341+83431.

Specifications

  • Item: Ford GT4-tec 2.0 Combo set (010d+1mm, 019, 021, 022, 028, 030, 033r, 035f, 048, 049f, 049r, 5053fr, 055, 056, 160) - 119pcs set
  • Material: Aluminum 6061 T6, POM, Delrin, stainless steel, copper
  • Model Number: GT1000
  • Compatibility: Ford GT4-tec 2.0 chassis (RC-scale)

Fit this combo when you want a compact upgrade pack to tighten steering response, change shock geometry and reduce ride height for sharper handling on a GT4-tec 2.0 build.

This item is compatible with

  • TRAXXAS FORD GT4-TEC 2.0

Do the arms and knuckles use the stock mounting pattern?

Yes, the control arms and knuckles are made to align with factory mounting points so replacement is straightforward for most builds.

Will changing to these dampers affect roll stiffness?

Shorter damper travel and thicker shafts reduce suspension compliance, which typically lowers roll and yields a more stable chassis at speed.

Are any special tools required for fitment?

Basic metric hex drivers and pliers are usually sufficient; small calipers help when checking collar fit and alignment.

Can I reuse my original screws?

Where sizes match you can reuse suitable fasteners, but the kit includes a comprehensive stainless steel fastener set to ensure correct fit and corrosion resistance.

Is this suitable for competitive tuning?

Yes, the adjustable mounting points and tie rod options make it useful for fine tuning handling for club level and track setups.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved