Front Carbon Shock Tower Compatible with NT1 2027 - 2.5mm, 2 pcs - XRAY 332086  [XR-332086]

XRAY 332086 - Carbon Shock Tower Front - 2 Positions - 2 Pcs
Price:
NZD$38.59
Brand:
XRAY
Model:
XR-332086
Condition:
Brand New
Write a review

Carbon Front Shock Tower — Built for NT1 2027

This front shock tower is precision CNC-machined from a 2.5mm carbon plate to offer several upper shock mounting points, giving you broader setup choices. The undulating, wave-like outline adds measured compliance at the front end, helping the car cope with rougher surface inputs and modifying handling balance without additional hardware swaps.

The part is intended for NT1 2027 assemblies that use front towers designed for aluminum bulkheads. It ships as two pieces to replace both left and right mounts on your chassis.

Fitting advice: confirm that your aluminum bulkheads accept a direct replacement tower plate and that the screw holes line up before tightening. Reuse the original screw types and torque settings where possible to avoid introducing stress concentrations in the carbon. Use the alternative upper positions to fine tune shock angle and ride height for balance adjustments before changing spring rates or damper oils.

Technical Specifications

  • Item Front Carbon Shock Tower
  • Material Carbon fiber
  • Model Number 332086
  • Compatibility NT1 2027
  • Thickness 2.5mm
  • Quantity 2 pcs

Ideal when you need predictable front-end tuning through upper-mount position changes and a clean fitment for NT1 2027 aluminium bulkheads.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can this tower withstand regular on-road impacts?

Carbon offers high stiffness but limited ductility; the tower is CNC-cut for durability in typical on-road conditions, though heavy impacts can cause edge chipping, so inspect after incidents.

Does the wave profile reduce breakage risk?

The wave-shaped profile spreads loads more evenly across the plate, which can reduce stress concentrations compared with a flat design, improving longevity under normal use.

Are both left and right towers included?

Yes, the item is supplied as a matched pair to ensure symmetric fitment and handling characteristics after installation.

Should I change mounting hardware when fitting these?

Only change hardware if your current screws do not match the thread type or hole spacing; otherwise reuse original hardware and torque settings to avoid overstressing the carbon edges.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved