Front Shock Body 13mm Service Part for Serpent SER500888  [SER500888]

Serpent 13mm front damper body

This component is an RC-scale front shock body designed to replace or service Serpent shock assemblies that accept a 13mm shock tube. The piece impacts internal oil capacity, piston stroke and seal integrity for on-road 1/10 scale vehicles.

Practical notes for installation and setup:

• Verify the outer diameter of your existing shock tube is 13mm so Serpent shock caps and shafts will mate correctly.
• Drain old oil when removing the body and check pistons, shafts and seals; change worn items to prevent premature failure.
• Select shock oil compatible with your setup and maintain precise oil height and bleed to tune damping response; small changes can alter handling noticeably.
• Inspect O-rings and thread engagement during reassembly to prevent leakage and keep rebound consistent.

The part is strictly for RC model use and should be handled as a model-scale shock component during maintenance and tuning.

A reliable service replacement for Serpent 13mm front shock use, suitable for restoring or altering front damping on hobby 1/10 scale cars.