Front Shock Tower for Works'91 TeamSpec - Yokomo YZ-017GW1  [YZ-017GW1]

Yokomo YZ-017GW1 Graphite Front Shock Tower (3.5mm) for Works\\\'91 TeamSpec
Price:
NZD$39.38
Brand:
Yokomo
Model:
YZ-017GW1
GTIN:
3888
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $59.90 each $-41.05 or -52%
3+ $53.90 each $-43.58 or -37%
Write a review

Technical notes on the graphite tower

The Yokomo YZ-017GW1 front tower is a dedicated 3.5mm graphite upgrade built for Works'91 TeamSpec applications. The plate reduces flex at the upper shock mounts and helps preserve consistent suspension geometry under load, which is valuable for lap-to-lap repeatability.

Constructed from medium-thickness graphite, the tower offers increased stiffness without a significant weight penalty, sharpening shock response while keeping the chassis balanced. It is profiled to match the standard upper mounting layout used on YZ-W91TS and YZ-W91, enabling a clean replacement of the original part.

Fitting guidance: attach the tower to the existing shock posts using the stock fasteners. No extra hardware is required in most cases. When altering setup, use the new upper mount holes and adjust shock length or spring rates to dial in turn-in and mid-corner behavior.

Technical specifications

  • Item: Front shock tower
  • Material: Graphite
  • Model Number: YZ-017GW1
  • Compatibility: YZ-W91TS, YZ-W91

Compatible models

  • YZ-W91TS
  • YZ-W91

Use this graphite tower when seeking firmer front response and more predictable shock action on Works'91 TeamSpec chassis, particularly for setups that prioritise consistent handling.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How resilient is a 3.5mm graphite plate under hard use?

A properly mounted 3.5mm graphite tower offers good resistance to flex while remaining reasonably impact tolerant; regular inspection for hairline cracks after heavy impacts is recommended.

Can this tower crack from repeated stress?

Graphite can fracture if overloaded repeatedly; avoid severe impacts and check mounting holes for wear. Replace the plate if you notice any signs of delamination or cracking.

Does graphite require special maintenance?

Maintenance is minimal: keep mounting faces clean and fasteners torqued correctly. Wipe dirt away after running and inspect for damage during routine checks.

Is the YZ-017GW1 resistant to vibration loosening?

When installed with correct fastener torque, the plate holds well; use thread locker on screws if you experience recurring loosening during events.

Will routine crashes shorten the tower's life?

Minor knocks are tolerated, but repeated heavy impacts will reduce service life. Inspect after any big hit and replace if structural integrity is compromised.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved