Front Stabilizer Kit for DP and MRTC Drift Chassis - Yokomo SD-412FSA  [SD-412FSA]

Yokomo SD-412FSA Front Sway Bar Set for DRIFT PACKAGE
Price:
NZD$13.37
Brand:
Yokomo
Model:
SD-412FSA
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DPRA category
Write a review

Front stabilizer tailored for drift chassis

This front anti-roll assembly is designed to limit lateral body roll while preserving forward and backward suspension travel. The pack contains five anti-roll wires so you can adjust stiffness steps; it is intended solely for use on drift chassis platforms.

Key notes:

  • Reduces lateral chassis roll while permitting normal longitudinal movement.
  • Includes five anti-roll wires: 1.2mm, 1.3mm, 1.4mm, 1.5mm, 1.6mm to allow stepped stiffness tuning.
  • Check wheel clearance: not suitable for cars with deep rim wheels due to space limits.

Included parts

  • Antiroll Bar Wire 1.2mm x1
  • Antiroll Bar Wire 1.3mm x1
  • Antiroll Bar Wire 1.4mm x1
  • Antiroll Bar Wire 1.5mm x1
  • Antiroll Bar Wire 1.6mm x1
  • Antiroll Bar Ball Stopper x2
  • Ball End Cap x2
  • Ball End x2
  • Antiroll Bar Holder x2
  • 3 x 3mm Set Screw x4
  • 3 x 4mm Set Screw x2
  • 3 x 12mm Set Screw x2
  • 3 x 8mm Button Head Screw x2

Compatibility

The items below are provided by the manufacturer as compatible chassis codes; confirm that the code matches your chassis before fitting the part.

  • DP-DP7C
  • DP-DP8
  • DP-DPRA
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-TSFCA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-C35A
  • DP-DM13A
  • DP-GDBFA
  • DP-ZCRA
  • DP-1093A
  • DP-TYS15A
  • DP-BL34DA
  • DP-B324RA
  • DP-SR86A
  • DP-PS13A
  • DP-TRS15A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-GDBA
  • DP-JZXA
  • DP-KOS15A
  • DP-IS220A
  • DP-TSS15A
  • DP-BLR34A
  • DP-APEXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • DP-DRG3
  • MRTC-SD9
  • MRTC-86
  • DP-DRG3G
  • DP-N86R
  • DP-N86W
  • DP-N15R
  • DP-N15W
  • DP-N15S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What clearance checks should I do before fitting the sway bar?

Measure wheel and suspension travel clearance around the bar path, confirm no interference with deep rim wheels, and verify the holder and ball ends have room to move freely.

Are special tools required for installation?

No special tools are needed beyond basic hex drivers for the set screws and button heads; use common hand tools to swap wires and secure the holder components.

Can I fit this to any non-DP chassis?

This product is intended for DP- and MRTC-series drift chassis. If your chassis is not listed, check dimensions and mounting points carefully before attempting to use the kit.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved