Front Steering Block Compatible with B-Max4 - Yokomo YOKBM415S  [YOKBM415S]

Yokomo BM-415S - Front Steering Blocks
Price:
NZD$14.23
Brand:
Yokomo
Model:
YOKBM415S
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Design and Fit for the B-Max4

The Yokomo YOKBM415S serves as a front steering block tailored to the Yokomo B-Max4 touring platform. As a replacement upright it integrates with the front suspension to let racers refresh worn components or trial different geometries during setup sessions.

To install, remove the front upright assembly, move over any reusable bearings and fasteners, seat the YOKBM415S into the hub carrier, then verify free movement of steering linkages. Recheck wheel alignment and steering centring once the car is back together before running.

In terms of setup the steering block works with toe, caster and ackermann adjustments, so swapping blocks is a tuning step that should be evaluated during iterative testing. Always inspect bearing surfaces and ball studs when changing uprights to ensure correct geometry for the B-Max4.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can fitting new steering blocks sharpen turn-in and steering feel?

Yes. Replacing worn blocks can reduce play at the steering joints, which often improves turn-in response and gives a more consistent steering feel during corner entry.

What should I inspect when changing uprights?

Check bearing condition, ball studs and mating surfaces for wear or damage. Ensure bearings press in correctly and that ball studs seat without excessive slop to maintain reliable geometry.

Will I need to alter setup after fitting the YOKBM415S?

You should verify toe and caster settings after installation and perform a short test run. Small trim or track adjustments may be necessary to restore the balance you had before swapping the upright.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved