6EXAP 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 - Futaba [6EXAP_c7]

Price:

NZD$316.81

Brand:

Futaba

Model:

6EXAP_c7

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba item 6EXAP - 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 Flight Transmitters System

QUALITIES:

Aileron, Elevator and Rudder twin price switch - make use of this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses is create nevertheless select, but generally, whenever switch is ��up�� the throws are greater (��high rate��) when the switch is ��down�� the throws are less (��low rate��). This switch also flips between exponential rates (if used).
Flap control dial/Channel 6 - This dial operates the servo installed on channel 6 towards receiver in case your model has flaps this is actually the control always run them.Aileron/elevator control stick -Mounting point for optional neck strap.
Trim levers (all) -Used to get the fundamental or center host to every servo as labeled into the diagram.
Recharging jack - Port for recharging the transmitter batteries aided by the included electric batteries charger.
On-off switch
INFORMATION INPUT lever - accustomed replace the values associated with various functions shown towards LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined up with with.
MODE key - constantly scroll through and show the ten or eleven(PCM) different functions.
PICK key - constantly expose the values today's function.
Throttle-cut key - to work well with the throttle-cut function, lower the throttle stick entirely, then drive the throttle-cut key to totally shut the carburetor and shut of motor.
Throttle/rudder control stick - operates the servos mounted on channel 3 (throttle) and channel 4 (rudder) within the receiver.
Trainer switch - Operates the trainer functions. For outcomes as a trainer switch the transmitter must be linked to another transmitter via. a trainer cable (available separately).
Retractable landing gear switch/Channel 5 - Switch operates the servo linked to channel 5 inside receiver in the event your model has retractable landing gear this is actually the control constantly expand and retract the apparatus.
Antenna - Radiates signals on receiver. Never ever travel a model without entirely expanding the antenna or maybe you may produce disruption to varied other modelers and decrease practical alert array of the transmitter. The antenna could be removed and changed with another in case its unintentionally broken.

Hot Brands

6EXAP 6-Channel PCM 35Mhz/ R136HP/ 4xS3003 - Futaba [6EXAP_c7]