6EXAP 6-Channel PCM 72Mhz/ R146IP - Futaba [6EXAP_c11]

Price:

NZD$212.86

Brand:

Futaba

Model:

6EXAP_c11

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
R/C Models - System - Transmitter - Flight Transmitters category

Write a review

Description

Futaba item 6EXAP - 6-Channel PCM 72Mhz/ R146IP Flight Transmitters System

FEATURES:

Aileron, Elevator and Rudder twin expense switch - employ this modification to ��flip�� between two aileron, elevator and rudder control throw settings. The tosses are generate nonetheless choose, but generally speaking, once the switch is ��up�� the throws are greater (��high rate��) whenever switch is ��down�� the throws are less (��low rate��). This switch additionally flips between exponential rates (if used).
Flap control dial/Channel 6 - This dial runs the servo connected with channel 6 into the receiver in the event the model has flaps here is the control regularly run them.Aileron/elevator control stick -Mounting point for optional neck band.
Trim levers (all) -Used to go the primary or center host to every servo as labeled toward diagram.
Charging you jack - Port for billing you the transmitter batteries with all the current included battery pack charger.
On-off switch
DATA INPUT lever - constantly replace the values concerning the different functions presented towards LCD display screen.
Liquid-crystal display (LCD) - shows development modes and values joined with.
MODE key - frequently scroll through and show the ten or eleven(PCM) various functions.
PICK key - accustomed show the values the existing function.
Throttle-cut switch - to make use of the throttle-cut function, reduced the throttle stick completely, then drive the throttle-cut key to totally shut the carburetor and shut towards motor.
Throttle/rudder control stick - runs the servos mounted on channel 3 (throttle) and channel 4 (rudder) in receiver.
Trainer switch - runs the trainer functions. To work with as a trainer switch the transmitter ought to be mounted on another transmitter via. a trainer cable (available independently).
Retractable landing gear switch/Channel 5 - Switch operates the servo attached to channel 5 on receiver should your model has retractable landing gear here is the control accustomed expand and retract kit.
Antenna - Radiates signals towards receiver. Never travel a model without completely expanding the antenna or possibly you might possibly produce interruption to many other modelers and decrease practical indication collection of the transmitter. The antenna can be expunged and changed with another in case it's inadvertently broken.

Hot Brands

6EXAP 6-Channel PCM 72Mhz/ R146IP - Futaba [6EXAP_c11]