Futaba 6EXAP_c9 6-Channel PCM 72MHz Transmitter Pack for Aircraft and Helicopters  [6EXAP_c9]

Price:
NZD$337.57
Brand:
Futaba
Model:
6EXAP_c9
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Futaba 6EXAP_c9 Product Summary

The Futaba 6EXAP_c9 is a 6-channel PCM transmitter tailored to pilots flying fixed-wing and rotary models on 72MHz frequencies. It focuses on usability at the flying field with clearly labelled switches and knobs for frequent adjustments like dual rates, flap travel and retract gear. Controls include a dedicated flap dial assigned to CH6, a retract switch on CH5, separate trims per axis, a throttle-cut switch, and a DATA INPUT lever alongside an LCD for quick access to settings.

To set up the unit, bind the supplied R136HP receiver to the Futaba 6EXAP_c9 and connect servos to the designated receiver ports (the set specifies four S3003 servos). Confirm servo directions and endpoint travel using the transmitter trims and dual-rate functions. Ensure the antenna is extended when operating on 72MHz for stable reception. Trainer use is supported via a trainer cord connection to a second transmitter as outlined in the controls information.

Specifications

  • Item Futaba 6EXAP 6-Channel PCM 72MHz transmitter set
  • Model Number 6EXAP_c9
  • Channels 6
  • Frequency 72MHz PCM
  • Receiver R136HP
  • Included servos 4x S3003
  • Display LCD screen for programming and values
  • Key functions Dual rate switches, flap dial (CH6), retract switch (CH5), throttle cut, trainer
  • Material Not specified

Compatibility

  • Intended for use with RC airplanes and helicopters using 72MHz PCM receivers.

The Futaba 6EXAP_c9 provides a practical control layout that reduces the need to navigate deep menus, which helps pilots perform quick in-field adjustments to rates, flap settings and training setups.

Are all components included in the box?

The box lists the Futaba 6EXAP transmitter, R136HP receiver, four S3003 servos and the transmitter charger among the included components.

How rugged is the Futaba 6EXAP_c9 for regular field use?

The unit is designed for routine field handling with accessible switches and a protected LCD; treat it as a precision radio and avoid impact or prolonged exposure to moisture to preserve longevity.

Can I replace the included servos with higher torque models?

Yes; substitute servos as needed but ensure they match the receiver channel wiring and that endpoint and direction are checked in the transmitter before flight.

What maintenance keeps this transmitter reliable?

Regularly inspect switches and the antenna, keep contacts clean, and store the transmitter with battery disconnected to extend component life and reliability.

Is the R136HP receiver included compatible with most 72MHz installations?

The R136HP is supplied for use on 72MHz PCM systems; verify your aircraft wiring and servo connectors match the receiver channel layout before final installation.

How should I charge and store the transmitter battery?

Use the supplied charger and follow safe charging procedures; store the transmitter at moderate temperature with the battery disconnected if not used for extended periods.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved