Futaba FUBS0169 Aluminium Clamp-Style Servo Horn 10g  [FUBS0169]

FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)
Price:
NZD$25.56
Brand:
Futaba
Model:
FUBS0169
Condition:
Brand New
Write a review
alt="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)" title="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)"
alt="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)" title="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)"
alt="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)" title="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)"
alt="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)" title="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)"
alt="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)" title="FUTABA 89WOS GM HEAVY DUTY ALUMINUM CLAMP SERVO HORN (10-gram)"

Aluminium clamp horn designed for Futaba outputs

The Futaba FUBS0169 clamp-style servo horn is manufactured from aluminium and weighs 10 grams, providing a metal alternative to stock plastic horns where greater longevity and reduced play are required.

The clamp format secures around the servo output, creating a firmer mechanical connection than some push-on designs. It is commonly used where improved steering accuracy and consistent link geometry are needed, such as in precision touring car setups or scale models with metal rod ends.

Installation guidance: with the servo centred, line up the horn spline, slide the clamp into position on the output and tighten the clamp screws in small, even increments to keep the horn angle steady. Use the appropriate hex tool and confirm the full travel is free from binding before finalising link adjustments.

On-track effect: fitting this heavy-duty clamp horn stabilises linkage geometry under load, helping steering inputs feel more direct and reducing incremental play from degraded plastic horns. Pair the horn with properly set turnbuckles or ball joints and verify servo neutral for predictable handling.

Specifications

  • Item Futaba heavy duty aluminium clamp servo horn
  • Material Aluminum
  • Model Number FUBS0169
  • Weight 10-gram

Use this aluminium clamp horn when durability and accurate steering geometry are priorities for your RC vehicle.

How do I line up the horn during fitment?

Centre the servo, place the horn so the spline teeth match the neutral position, then clamp and tighten the screws gradually to avoid twisting the horn.

Should I use threadlocker on the screws?

A small amount of medium-strength threadlocker can help prevent screws loosening after repeated runs, but apply sparingly so future removal remains possible.

Will the extra weight affect servo response?

The 10g aluminium horn adds mass relative to plastic; most setups will see minimal impact, but re-check endpoints and trim to ensure optimal response.

What checks after the first run?

After initial use, re-torque the clamp screws and inspect the spline fit for any signs of wear or movement, adjusting links if needed.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved