Futaba FUEBA0324 ESW-1D High Power On/Off Harness T-Deans to RX  [FUEBA0324]

In-line receiver power switch

The Futaba FUEBA0324 ESW-1D serves as an on/off electric switch harness for RC electric models that use T-Deans style battery plugs and a direct receiver power lead. The harness length is set to keep installations compact while still providing a switched connection between the battery and receiver power input.

Key compatibility: the harness connects a T-Deans male/female battery plug to the receiver (RX) input and places an on/off switch inline with the positive conductor. It is intended for conventional RC electric systems and should only be used where direct battery switching by the harness is accepted by the receiver or inline electronics.

Fitment advice: avoid routing the harness near suspension travel, gear mesh, or motor cooling outlets. Fix the switch in position with ties or a small adhesive pad so the actuator cannot catch on wiring or chassis features. Always verify polarity when joining the receiver and battery leads to prevent reversed connections.

Role in setup: this harness is a convenient field and bench accessory for powering the receiver and associated devices without unplugging the battery. It assists with pre-run procedures and reduces battery drain risk, but it does not replace appropriate battery safety practices or an ESC electronic cut-off where required.