Futaba R303FHS Multi-Band 3-Channel Receiver [R303FHS]

Futaba R303FHS Synthesized 3-Channel Receiver 27MHz/ 40MHz/ 75MHz

Price:

NZD$145.07

Brand:

Futaba

Model:

R303FHS

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the

R/C Models - System - Receivers

Compact Futaba R303FHS Receiver for Different Frequency Bands

The Futaba R303FHS is a synthesized 3-channel receiver built for modelers needing flexible frequency options. It handles 27MHz, 40MHz and 75MHz ranges and its automatic mode detection ensures the unit selects HRS or PPM to match your transmitter signal.

Notable Features of the R303FHS

Auto Detection: Detects HRS or PPM automatically so you can swap transmitters with minimal fuss.
Compact Design: Small dimensions of 39.5mm by 27mm by 14.5mm suit cramped radio bays.
Lightweight: At 17g it adds very little mass to your model.
Wide Frequency Coverage: Works on 75MHz channels 61-90 for dependable range.
Low Current Draw: Operates from 6V NiCd packs with an approximate drain of 95mA.

Specifications

Length: 39.5mm
Width: 27mm
Height: 14.5mm
Weight: 17g
Receiving Frequency: 75MHz (channels 61-90)
Intermediate Frequency: 455kHz
Power Supply: 6V (NiCd 5 cells)
Current Drain: Approx. 95mA

For hobbyists running older band systems or swapping transmitters, the Futaba R303FHS offers a compact, efficient solution with automatic mode selection that reduces setup time.

Is setup complicated for mixed band use?

Setup is straightforward since the receiver detects the transmitter mode automatically, removing the need for manual switching.

Can I use modern transmitters with this unit?

If the transmitter outputs on 27MHz, 40MHz or 75MHz and uses HRS or PPM signalling, the R303FHS will work with it.

How do I reduce interference on 75MHz?

Use correct channel spacing, position the receiver away from noisy electronics and keep the antenna fully extended to improve reception.

Hot Brands