Futaba item S9001 - Servo Aircraft Coreless BB Standard Servos System
This is the Futaba Ball Bearing S9001 Servo.
This servo has one servo horn connected, three extra
servo horns and mounting equipment.
This servo can make high-current draw from your own batteries.
If making use of NiMH or Li-Po batteries, get them to capable
of delivering enough Amps.
FEATURES: last gear has one ball bearing for fast transport time.
Coreless motor for smooth and quick reaction.
Ideal application for airplanes, sailplanes, helicopters, nitro or
electric driven ships.
INCLUDES: One Futaba Ball Bearing S9001 Servo with J connector another 0.83"
(21mm) circular servo horn, one 1.38" (35mm) servo horn, one 4 point
1.53" (39mm) servo horn, one 6 point 1.26" (32mm) servo horn, four
rubber grommets, four 2mm x 11mm self tapping phillips head screws
and four metal eyelets.
NEEDS: Phillips screwdriver (can use HCAR1020) to install servo.
SPECS: Length: 1.6" (40mm)
Width: 0.8" (20mm)
Height: 1.4" (36mm)
fat: 1.7oz (48g)
Torque: 54 oz/in @ 4.8V - 72 oz/in @ 6V
(3.9 kg/cm @ 4.8V - 5.2 kg/cm @ 6V)
Transit Time: .22 sec/60 deg @ 4.8V - .18 sec/60 deg @ 6V
Warranty: Futaba warrants this servo for starters 12 months against defects in
material or workmanship.
REMARKS: If additional accessory instance will become necessary usage Futaba component #FSH42 (FUTM3550).
A note on coreless motors-a mainstream servo motor has a steel core
armature covered with cable that spins inside the magnets. In a
coreless design, the armature makes use of a wire mesh that types a cup
that spins on the not in magnet. This arrangement is
much lighter causing smoother procedure and quicker response
time.
