Futaba item S9151 - Servo Digital Rudder Standard Servos System
here is the S9151 Digital tall Torque Rudder F3A Servo.
This might just be utilized as well as 4.8V batteries.
This servo can cause high-current draw from your own batteries.
If using NiMH or Li-Po batteries, encourage them to capable
of delivering enough Amps.
QUALITIES: Digitally enhanced microprocessors cut about 1/2 the response
time from transmitter input to servo response.
Digital procedure enables this servo to obtain complete power immediately
and protect torque longer.
High-capacity, high-current cable with low opposition.
Coreless engine (a wire cage rotates across the magnet).
High cost means of instant effect.
Dual ball bearings on production shaft.
Delivers high torque rudder operation for accuracy fixed-wing F3A
pattern aircraft.
Dust and waterproof (maybe not Waterproof)
Black synthetic situation.
One year guarantee.
INCLUDES: One S9151 Digital tall Torque Rudder F3A Servo w/Futaba J Connector
a tiny circular servo horn
Four Rectangular Grommets
Four Brass Bushings
Four 2 x 11mm Mounting Screws
One big Round Horn
One Six supply Horn
One Four supply Horn
SPECS: Length: 1.6" (41mm)
Width: .8" (20mm)
Height: 1.5" (38mm)
fat: 1.8 oz (50g)
Speed: 0.19 sec/60?@ 4.8V
Torque: 132 oz/in (9.5 kg/cm) @ 4.8V
Power Supply: 4.8 (Futaba does not suggest using 6V)
FEATURES: S9151 Digital Servo Precautions,
-It is most beneficial to stop long leads and Y-harnesses especially with
standard grade cables. If issues are skilled, consider using
heavy obligation cable particularly Futaba's durable Series or Hobbico's
Pro Series, minimizing lead lengths, and/or eliminating Y-harnesses.
-Current Drain: Futaba S9151 Servo is incredibly created for high-
torque and high-speed, because of this high current drain is
normal at startup. For ultimate performance whenever making use of this servo,
please review these points.
(1) Whenever using systems using the power packs fail safe function it has
a greater cut-off voltage environment that will cause shorter
operation time.
(2) Whenever developing the servo please check pushrod linkage to make
sure there is no binding to prevent exorbitant power
consumption and reduce living linked to the motor and battery pack.
This electronic servo may not be with the after * have always been *
transmitters as the servo fundamental indicator is: 1310us).
CONQUEST will always be, FG Series (T4FG, T5FGK,T6FG, T6FGK, T7FGK), amazing Terra-
top, T3EGX, T3PGE, T2NL, T2LGX, T2FR, T2PK show.
**** Otherwise they will work fine with current AM systems *****
