FW05 Rear Graphite Body Post Reinforcement Plate FW05-028 by 3Racing  [FW05-028]

Kyosho FW05-R /FW05RR /V One RRR /V One S /V One SII /V One SIII /V One R /V One RR /V One RRR Evo Rear Graphite Body Post Plate - 3Racing FW05-028
Price:
NZD$8.08
Brand:
3Racing
Model:
FW05-028
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Graphite Rear Post Reinforcement

This graphite rear body post plate is a direct replacement for Kyosho FW05 family cars and carries the part number FW05-028. The plate reinforces the chassis area where the rear body posts mount, providing a stiffer and more stable anchor for the shell.

Compatibility is listed precisely for these Kyosho variants: FW05-R, FW05RR, V One RRR, V One S, V One SII, V One SIII, V One R, V One RR, V One RRR Evo. Always confirm the chassis code before fitting to avoid mismatch.

Installation and tuning notes:

  • Take off the stock rear plate and align the replacement to the original fixing points; it is intended to reuse factory screws and the existing posts where applicable.
  • Use the correct sized hex driver and apply moderate torque to prevent compressing the graphite; make sure the posts are perpendicular to the body for correct trimming lines.
  • As a setup tune, a firmer rear plate alters how the body loads the rear end and can reduce flex at the rear clip; re-adjust body post height and clip location after fitting to fine-tune handling.
Yes, V One S is one of the models cited in the compatibility list and will accept the plate when the chassis matches.
No drilling is normally required; the plate is designed to align with the factory mounting points and reuse existing hardware where possible.
You can expect reduced rear clip flex and a crisper rear response. Small adjustments to body height and clip placement are recommended to balance the car.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved