3RACING FW05-RR005-GT/A Kyosho FW05RR Front Graphite SSG Tower  [FW05-RR005-GT/A]

Kyosho FW05RR Front SSG Graphite Shock Tower - 3RACING FW05-RR005-GT/A
Price:
NZD$17.35
Brand:
3Racing
Model:
FW05-RR005-GT/A
Condition:
Brand New
Write a review

Refine front-end control on the Kyosho FW05RR with a graphite tower

The 3RACING FW05RR Front SSG Graphite Shock Tower provides a low-mass, stiff mounting point for the front shocks on the Kyosho FW05RR. Its graphite construction helps limit unwanted flex and keeps suspension geometry consistent under load.

Graphite benefits for handling and weight

Using graphite reduces rotating and sprung mass at the nose, improving steering feedback and allowing quicker directional changes. The material also keeps structural strength without adding unnecessary weight to the chassis.

Designed for direct swap installation

This part follows the Kyosho FW05RR mounting pattern for a direct fit. The swap uses stock fixings and needs only basic tools, so you can get back on track and test settings with minimal downtime.

No chassis modification is required; the tower is made to bolt onto the Kyosho FW05RR using the original screw locations.
It can help by offering more consistent suspension geometry and improved steering precision, which makes setting up the car for quicker laps easier.
Keep the mounting surfaces clean and check screw torque regularly. Inspect for chips after impacts and replace if structural damage is visible.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved