Gmade GS01 Sawback 88mm Aluminum Shock Set by GPM SW088X  [SW088X]

Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X
Price:
NZD$32.52
Brand:
GPM
Model:
SW088X
GTIN:
4894538010039
Condition:
Brand New
Write a review
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"
alt="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X" title="Gmade 1/10 Gs01 Sawback 4WD Vehicle Aluminium Front/Rear Internal Shocks (88mm) With Engraving- 1pr set (For KOmodo / Sawback) - GPM SW088X"

Aluminum Internal Shocks for Gmade GS01 Sawback

Replace the standard dampers on your Gmade 1/10 GS01 Sawback with these 88mm aluminum internal shocks for stronger, more consistent suspension action. They are crafted to suit both KOmodo and Sawback models while offering engraved detailing for correct alignment and appearance.

Feature Highlights for the GS01 Shocks

  • Material: Durable aluminum construction to reduce flex and weight
  • Compatibility: Intended for use on Gmade 1/10 GS01 Sawback and KOmodo rigs
  • Length: 88mm, matched for balanced travel and geometry
  • Design: Internal shock layout with engraved finishing for neat installation

Why Install These Shocks

These shocks deliver steadier handling and better tracking over uneven surfaces, making them a sensible upgrade for trail running and general hobby use where reliability matters.

Compatible Models

  • Gmade 1/10 GS01 Sawback
  • KOmodo

Do these fit the KOmodo without modding?

They are made for KOmodo compatibility and should install without modification on standard KOmodo layouts using stock mounts.

Are seals and spare parts available?

Seals and common wear parts are widely available; check your usual parts supplier for compatible shock seals and shafts if needed.

Which oil weight suits trail running?

A medium weight oil is a good starting point for mixed terrain; increase viscosity for slower rebound on rougher trails.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved