GPM GM1605 5mm Tie Rod Upgrade for Gmade R1 Rock Buggy  [GM1605]

Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605
Price:
NZD$67.88
Brand:
GPM
Model:
GM1605
GTIN:
4894538251579
Condition:
Brand New
Write a review
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"
alt="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605" title="Gmade 1/10 R1 Rock Buggy Aluminium 5mm Anti-thread Tie Rod (For set ting 300mm-323mm Wheelbase) - 8pcs set - GPM GM1605"

Aluminum Steering Rods for Gmade R1 Performance

Refresh your Gmade 1/10 R1 Rock Buggy with the GPM GM1605 anti-thread 5mm tie rod set. Designed to improve steering consistency and to resist fastener backing out when tackling uneven terrain. The adjustable length supports wheelbases from 300mm to 323mm for a tidy fit.

Why these Tie Rods Help on Trails

The hardwearing aluminum construction adds stiffness where it counts, helping maintain toe alignment over rocky or rooty courses. The anti-thread feature reduces the need for constant retightening after heavy runs.

Installation and Compatibility Tips

Fitting is simple with standard RC toolkits. The set is intended for direct use on the Gmade R1 Rock Buggy, offering a neat upgrade path with minimal trimming or alterations.

Specifications

  • Material: Aluminum
  • Diameter: 5mm
  • Adjustable Wheelbase: 300mm-323mm
  • Quantity: 8pcs set

Can I use these on a modified chassis?

If your chassis keeps the R1 steering mounts and arm spacing, these can work. Measure existing tie rod lengths and end fittings before swapping.

Are the rod ends greased from the factory?

Rod ends are supplied dry; apply a small amount of suitable bearing grease to metal-to-metal joints to reduce wear and noise.

Will this change steering responsiveness?

Yes, the stiffer aluminum rods reduce flex in the steering link, producing a sharper and more predictable response.

How do I set the wheelbase length?

Adjust the threaded section to the desired length and lock the rod ends. Confirm the 300mm-323mm range matches your chassis before final tightening.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved