GMADE R1 Main Drive Shafts Steel and Aluminium Front + Rear - GM237SAAM by GPM  [GM237SAAM]

GMADE R1 ROCK BUGGY Steel+Aluminium Front + Rear Main Drive Shaft (F:122mm-132mm, R:105mm-115mm) - 2pcs set (Custom Colors) - GPM GM237SAAM
Price:
NZD$58.10
Brand:
GPM
Model:
GM237SAAM
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="GMADE R1 ROCK BUGGY Steel+Aluminium Front + Rear Main Drive Shaft (F:122mm-132mm, R:105mm-115mm) - 2pcs set (Custom Colors) - GPM GM237SAAM" title="GMADE R1 ROCK BUGGY Steel+Aluminium Front + Rear Main Drive Shaft (F:122mm-132mm, R:105mm-115mm) - 2pcs set (Custom Colors) - GPM GM237SAAM"

Main Drive Shaft Kit for Front and Rear

This kit supplies front and rear main drive shafts tailored to the GMADE R1 Rock Buggy, referenced as model GM237SAAM. The design couples robust steel sections with lighter aluminium interfaces to reduce rotating inertia while keeping key areas strong, and the pair of shafts covers both axle ends.

Length adjustability is provided so you can align shafts to your vehicle's axle and gearbox spacing. Front adjustment spans 122mm to 132mm and rear spans 105mm to 115mm, allowing for precise matching to R1 axle geometry when replacing plastic or worn metal parts.

Before fitting, verify the hub bore and coupling method on your hubs and transmission outputs. Fitting requires axle carrier access and secure fastening with compatible hex screws; inspect splines and bearings after initial runs to ensure correct seating.

Specifications

  • Item: Front + Rear Main Drive Shaft set
  • Material: Steel + Aluminium
  • Model Number: GM237SAAM
  • Compatibility: GMADE R1 ROCK BUGGY
  • Front Length Range: F:122mm-132mm
  • Rear Length Range: R:105mm-115mm
  • Quantity: 2pcs
  • Color: Custom Colors

Ideal for replacing worn shafts or tightening drivetrain flex on a GMADE R1, just match the lengths and coupling style for correct installation.

Can these be shortened or extended easily?

The shafts have the stated adjustable ranges; pick positions within 122mm-132mm front and 105mm-115mm rear to fit your axle spacing rather than cutting or machining.

Will these work with aftermarket hubs?

They interface via common hub and transmission coupling methods but you should confirm bore diameter and coupling type on your aftermarket hubs before purchase.

Are these suitable for heavy rock crawling?

The steel sections are placed where wear and torsion are highest, so these shafts are intended to be more durable than typical plastic originals for scale rock use.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved