Gmade R1 Rock Buggy Servo Mount Aluminium GM024 by GPM  [GM024]

Aluminium servo bracket made for the 1/10 R1 chassis

This aluminium servo bracket is supplied as a single-piece replacement for the Gmade 1/10 R1 Rock Buggy platform. It is designed to hold a standard 1/10 servo on the R1 chassis and to give a firm mounting point for alignment and basic tune-ups without altering the original geometry.

Installation is simple for hobbyists who maintain 1/10 rock buggies. Remove the existing mount, align the aluminium bracket with the servo tray and screw holes, then fasten it with the original hardware. Double-check servo horn position and endpoint programming once fitted. No additional adapters or fittings are included.

As a tuning component, the bracket is mainly a structural swap that can influence how the servo couples to steering linkages and suspension inputs. Use it to keep consistent servo placement while testing different servos or replacing a damaged stock mount. Regular fastener inspections are advised after rough terrain use.