GPM Tamiya CC-01 Aluminium Centre Gearbox Mount CC038M - Chassis Option  [CC038M]

Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M
Price:
NZD$30.68
Brand:
GPM
Model:
CC038M
GTIN:
4894538030914
Condition:
Brand New
Write a review
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"
alt="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M" title="Tamiya CC-01 Alloy Center Gear Box Mount - 1set - GPM CC038M"

Centre gearbox support for the CC-01 chassis

This alloy centre gearbox mount is an aftermarket replacement made for the Tamiya CC-01 platform and supplied as model CC038M. It locates the centre gearbox and helps improve drivetrain alignment and overall chassis rigidity while keeping the original gearbox layout intact.

Replacing the original plastic bracket with this metal unit reduces flex at the gearbox interface and is intended to use standard CC-01 mounting points and fasteners for a simple installation.

On installation, always check gear mesh and driveline angles and confirm there is adequate clearance around the motor and spur gear. Minor shim changes or different screw torque settings are typical adjustments to remove noise and ensure reliable engagement.

Specifications

  • Item: Alloy center gear box mount
  • Material: Aluminum alloy
  • Model Number: CC038M
  • Compatibility: Tamiya CC-01

A practical upgrade for builders wanting a firmer gearbox mount on CC-01 models; fit with care and verify drivetrain alignment post-install.

This item is compatible with

  • TAMIYA CC01

Is this compatible with all CC-01 variants?

It is designed around the standard CC-01 mounting pattern; check your variant for any custom chassis mods before fitting.

What is the material used?

The mount is made from an aluminium alloy chosen to reduce flex in comparison to the original plastic bracket.

Will the motor position change?

The mount does not change gearbox geometry, but check motor and spur clearance after fitting and adjust as needed.

How do I eliminate drivetrain noise?

Fine-tune gear mesh with shims or slight screw torque changes until noise is removed while keeping secure engagement.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved