GPM TRAXXAS E-REVO Differential Carrier Silicone Gasket ER011/P - Chassis Option  [ER011/P]

TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P
Price:
NZD$8.40
Brand:
GPM
Model:
ER011/P
GTIN:
4894538329926
Condition:
Brand New
Write a review
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"
alt="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P" title="TRAXXAS E-REVO Silicone Gasket For Differential Carrier - 2pc set - GPM ER011/P"

Silicone gasket for diff carrier

This pair of silicone gaskets is produced as a replacement sealing set for the differential carrier fitted to TRAXXAS E-REVO scale models. Intended for hobby use, the parts are supplied as aftermarket components under part code ER011/P.

Silicone material balances compliance and resistance to compression, so the gasket maintains a close seal around the carrier joint without permanent flattening in normal operation. Good sealing reduces gear oil loss and helps maintain a stable lubricant environment for internal gears and bearings.

To install: clean the carrier faces to remove old grease or sealant, press the gasket into the carrier recess, and assemble the carrier halves with even screw torque. Avoid overtightening and confirm the differential turns freely before reinstalling in the model.

Packing includes

  • Gasket - 2pcs

Original Name / Part No:

3978

This item is compatible with

  • TRAXXAS E-REVO
  • TRAXXAS Slash 4X4
  • TRAXXAS XO 01
  • TRAXXAS SLASH 4X4 LOW CG

Is the gasket reusable after removal?

If the gasket remains undamaged and not overly compressed, it can be reused, but inspect for cuts or permanent squashing before refitting.

Can I use different diff oil with these gaskets?

Yes, the gaskets are compatible with typical gear oils; ensure no external contaminants are present when reassembling.

Should I add sealant on top of the gasket?

Normally the gasket alone provides the seal; avoid excess sealant that could prevent correct seating or squeeze out into bearings.

What maintenance helps prolong the gasket life?

Keep the mating surfaces clean, avoid over-torquing, and replace the gasket if it shows signs of permanent compression or damage.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved