Yokomo YX-04 Graphite Lower Brace - compatible with YR-X12/YR-X1219 [YX-04]

Yokomo YX-04 Graphite Lower Brace for YR-X12

Price:

NZD$14.15

Brand:

Yokomo

Model:

YX-04

GTIN:

3888

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - YRX12 category

Write a review

Description
FAQ

Product overview and fitment notes

This graphite lower brace is manufactured as a direct-fit option for the Yokomo YR-X12 series of 1/12 competition cars, including YR-X1219. Its role is to boost torsional stiffness low in the chassis, where even small stiffness shifts influence entry grip, mid-corner behavior, and overall consistency on track.

Fitment is clear-cut for those familiar with 1/12 class work: the brace screws into the vehicle's existing lower chassis mounting points and normally reuses the stock or current hardware. Additional machining is not expected, but double-check clearance around batteries, ESC, and receiver leads when fitting graphite components.

Setup impact: adding this lower graphite brace biases chassis flex toward a firmer lower plane. Anticipate changes in transient steering and front-end bite; test progressively to determine the best balance for your car.

Models supported

YR-X12
YR-X1219

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What steps are needed to install the lower brace?

Remove the lower chassis fastenings, position the graphite brace against the existing mounting locations, and refit using the stock or current hardware. Tighten progressively and confirm there is no contact with wiring or electronics before final runs.

Should I modify electronics placement when fitting graphite parts?

It is wise to check and, if necessary, adjust electronics and wiring to avoid pinch points. The brace typically fits without relocation, but confirm battery, ESC, and receiver clearances during a trial fit.