Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Izumo Takeoff and Landing Test Model Kit - Shipboard Trials Edition  [HA-02398]

Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo
Price:
NZD$55.82
Brand:
Hasegawa
Model:
HA-02398
GTIN:
4967834023987
Condition:
Brand New
Available in warehouse
Write a review
alt="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo" title="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo"
alt="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo" title="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo"
alt="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo" title="Hasegawa 02398 - 1/72 F-35 Lightning II (B Version) U.S.M.C. VMFA-242 Test of taking off and landing on Izumo"

Hasegawa 1/72 F-35 Lightning II B Variant for Ship Trials

This Hasegawa 1/72 model represents the F-35B as used during VMFA-242 evaluations on the Izumo. It is tailored for modellers who want a realistic small-scale example of modern naval aviation testing.

Context of the Izumo Deployments

The F-35 Lightning II mixes low observable features with cutting-edge avionics and multirole capability. VMFA-242's operations on the Izumo demonstrate the B variant's STOVL performance and adaptability to maritime test missions.

Modelling Considerations

The kit includes precise components and decals that let builders highlight the lift fan and vectored nozzle details. Painting and careful assembly will bring out the relief and panel lines; this kit rewards patience and accurate finishing.

Specifications

  • Scale: 1/72
  • Material: PS plastic
  • Assembly: Glue required
  • Paint: Recommended for realistic finish
It is more suitable for model builders with some experience. The small details and alignment of vectored nozzle parts need steady hands and experience with glue and fillers.
Yes, the kit decals are designed to match the VMFA-242 test markings. Use decal setting solution and thin coats of clear to integrate them into the paint finish.
Fine-point applicator liquid cement, hobby knives, sandpaper, and small clamps are handy. A pin vise can help with any minor drilling for mounting or detailing.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved