Retro racer model - Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11 Model Kit  [HA-21511]

Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11
Price:
NZD$51.34
Brand:
Hasegawa
Model:
HA-21511
GTIN:
4967834215115
Condition:
Brand New
Available in warehouse
Write a review
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"
alt="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11" title="Hasegawa 21511 - 1/12 Yamaha TZR250 (1KT) 1985 BK-11"

Scale replica of the 1985 Yamaha TZR250 by Hasegawa

This Hasegawa 1/12 scale model recreates the Yamaha TZR250 (1KT) from 1985, reflecting the machine's compact two-stroke race geometry. The kit is tailored to modellers who value accurate shapes and period-correct detail in a historic road racing subject.

Detailing and Fit

The moulding reproduces the TZR250s characteristic fairings, frame traces and wheel profiles. Small parts are included to enhance realism and the supplied decals make it straightforward to emulate race graphics from the era.

Build Complexity

Expect a moderately challenging build that rewards careful preparation. Parts are precision-moulded and benefit from dry-fitting and light sanding prior to glueing to achieve tight seams and accurate alignment.

Specifications

  • Scale - 1/12
  • Material - PS plastic
  • Assembly - glue required
  • Decals - included
Some modders adapt aftermarket detail sets or scratchbuilt parts, but check scale and fit carefully. Small changes to mounting points may be needed for custom parts.
Build time varies with experience. A focused weekend can complete basic assembly, while full prep, paint and finishing can take several sessions for a high quality result.
Clean parts with mild detergent to remove mould release, sand lightly where needed and use a plastic primer before applying top coats for best adhesion and a smooth finish.

Copyright © 2008-2025 rcjaz.co.nz All rights reserved