Hobbywing 30105400 QuicRun WP 860 Dual Brushed ESC - Compact Dual Drive  [HW-30105400]

HOBBYWING QuicRun WP 860 Dual Brushed - 30105400
Price:
NZD$57.37
Brand:
Hobbywing
Model:
HW-30105400
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400" title="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400"
alt="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400" title="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400"
alt="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400" title="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400"
alt="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400" title="HOBBYWING QuicRun WP 860 Dual Brushed - 30105400"

Compact Dual Drive for Scale Crawlers

The Hobbywing QuicRun WP 860 Dual Brushed ESC, model number 30105400, is aimed at hobbyists who need dependable motor control in small to medium scale rigs. The sealed casing protects electronics from moisture and dust, helping maintain consistent performance on muddy trails.

What Makes the QuicRun WP 860 Useful

This ESC includes a switch mode BEC to keep servos powered at 5V and supports two brushed motors through separate outputs, making it economical for dual-motor rigs. The ESC's auto throttle calibration plus jump cap configuration keeps setup simple for club racers and scale builders.

Specifications

  • Scale: 1/8th, 1/10th
  • Motor Type: Brushed
  • Waterproof: Yes
  • Continuous/Peak Current: 60A/360A
  • Input: 2-4S LiPo, 6-12 Cells NiMH
  • BEC Output: 5V/3A
  • Input Wires: Red-16AWG-150mm×2, Black-16AWG-150mm×1
  • Output Wires: Blue-16AWG-100mm×2, Yellow-16AWG-100mm×2
  • Output Connectors: 4.0 Bullet Connectors (Female)
  • Fan Size: 25.0×25.0×10.0mm
  • Voltage Range: 5-7.4V
  • Size: 46.0×36.0×26.3mm
  • Weight: 73g

For scale trail runs and small tracked vehicles the Hobbywing QuicRun WP 860 Dual Brushed ESC gives practical dual motor control and simple tuning options for both newcomers and experienced modellers.

Yes. The ESC has separate outputs intended for two brushed motors, ideal when you need matched torque for crawlers or twin motor setups.
No external LED programmer is required. Parameters are set using jump caps and the ESC supports automatic throttle calibration for easy setup.
Keep the cooling fan and case vents clear of muck, check bullet connector seating, and inspect wiring for wear after offroad sessions to prolong ESC life.
Avoid using packs beyond the 4S LiPo or the specified NiMH cell count to prevent stressing the ESC and connected motors.

Copyright © 2008-2026 rcjaz.co.nz All rights reserved